筠尚asa塑木外墙装饰挂板
产地/品牌 : | 浙江.杭州 | 材质 : | 塑木 |
款式 : | 浮雕 | 颜色 : | 多色入 |
隔声指数 : | 10db | 导热系数 : | 0.75W/m·K |
型号 : | ys-s99 | 品牌 : | 筠尚 |
筠尚asa塑木外墙装饰挂板 杭州筠尚新材料有限公司公司荣誉出品
1、防水、防潮、防虫蚁
相对来说,这类产品的使用寿命会比实木材质更为长久,它 的特性就是防水、防潮、防虫蚁,所以有效的解决了对潮湿和多水环境中吸水受潮后容易腐烂、膨胀变形的问题,可以使用到传统木制品不能应用的环境中。
2、色彩丰富、可塑性强
这类产品的色系非常丰富,因此可供用户挑选的余地很多,同时还能依据自己的喜好来定制所需的色彩,充分的体现出个性化风格,尤其是一些年轻人,非常喜欢这种装修方式。
3、环保性高、防火性强
从目前大众选用的质料来看,大多更加注重产品的环保性能,而木塑板不含苯物质,甲醛含量为0,低于于EO级标准,为欧洲定级环保标准,可循环利用,大大节约了木材使用量,适合可持续发展的国策,另外它的防火性很强,遇火自熄,不产生任何有毒气体。
4、安装简单、吸音效果佳
对于这类产品的安装,无需过于复杂的工艺,有效的节约了操作时间及费用,同时它的可加工性很好,比方说订、刨、锯、钻等都能轻易实现,另外它的吸音效果佳,节能性能好.
木塑墙板安装方法
在动工前,首先要检查产品的型号及尺寸,以及其表面是否存在损坏,其次准备相关工具进行安装,然后根据安装示意图,用电钻打孔,再将木塑龙骨安装在地面上,并用自攻螺钉固定,使其与木塑墙板的表面一致, 后在铺设开始和结束位置,用螺钉将木塑墙板和龙骨做个固定,将塑料卡扣用在其余木塑墙板和龙骨的交界处,检查是否牢固连接。
Jun shang asa plastic wood exterior wall decoration hanging board hangzhou jun shang new materials co., LTD
1. Waterproof, moisture-proof and insect-proof
Relatively, the service life of this kind of product can be more long than real wood material, its biggest characteristic is waterproof, moistureproof, insect-proof ant, solved effectively so the problem that is easy to rot after absorbing water and being affected by damp in damp and much water environment, expand deformation, can use in the environment that traditional wood product cannot apply.
2. Rich color and strong plasticity
The color department of this kind of product is very rich, because this can offer the leeway that the user chooses very much, still can customize the color that needs according to his be fond of at the same time, sufficient body gives individuation style, especially a few youths, like this kind to decorate means very much.
3, high environmental protection, fire prevention
From the point of the public to choose material, mostly pay more attention to the environmental performance of products, wood and plastic board does not contain benzene, formaldehyde content is 0, below in EO level standard, for the European environmental protection standard of grading, recycled, greatly save the wood usage, is suitable for the sustainable development of the national policy, and its fire retardancy is very strong, in self-extinguishing fire, do not produce any toxic gases.
4, simple installation, good sound-absorbing effect
For the installation of this kind of products, without too complicated technology, effectively saves the operation time and cost, at the same time it can be processed very well, such as set, planer, saw, drill can be easily achieved, in addition to its sound-absorbing effect is good, good energy-saving performance.
Installation method of wood-plastic wallboard
Before construction, the first thing to check the product's type and size, and whether its surface is damaged, then prepare related tools for installation, and then according to the installation diagram, use electric drill holes, then install wood plastic keel on the ground, and tapping screws, to make it consistent with the surface of the wood plastic wall plate, finally at the start and end position, laid with screw to fix a wood plastic wall plate and keel, use plastic buckles on the rest of the wood plastic wall plate and keel, check whether the strong connection.